openthread's questions - English 1answer

27 openthread questions.

I am currently following the steps to set up a Raspberry Pi 3B as a border router on openthread.io (here). NCP and joiner are both KW41Z with corresponding switches set when built. When I try to add ...

On the official OpenThread / Platforms site it lists basically 3 way to use the OT stack. (https://openthread.io/platforms/) The first runs on a single device, the second communicates with the OT ...

I am starting to develop for Android Things and I was wondering if it was possible to implement OpenThread Border Router on a Raspberry PI 3B with Android Things flashed into it. https://github.com/...

The Border Router setup guide spells out how to connect a USB-based network coprocessor. As I understand it, it is easy to use a serial connection of the host to connect to an NCP. Is it just a matter ...

How can I compile the OpenThread examples on Mac OS? The scripts supplied in the repository do not work, because they use apt-get which is not available in Mac OS. Is there some kind of guide on how ...

On OpenThread Certification Prerequisites say Note: Only the OpenThread reference firmware images provided as part of the Thread Test Harness release are officially supported by the Thread Group. ...

On the Thread Test Harness Software Installation and Quick Start Guide there is no mention regarding how to certificate a Border Router. Always it is talking about the DUT, but it doesn't mention if ...

I'm looking to port Open Thread to Beagle Bone and planning on using a sub 1Ghz radio, AT86RF212B. Is it possible to use the open thread protocol stack with this transceiver? Thanks in advance!

I'm a seasoned developer who is jumping into to OpenThread for home automation specifically for Nest products. I'm more interested in exploring the possibility of communicating with Nest devices ...

How does an application running on a gateway intially discover the Mesh Local EID of all other devices on a Thread network?

I was able to build openthread for cc2650 and download it on cc2650stk / SensorTag via debug-devpack, but openthread doesn't seem to start properly, red led is on and I cant get any USB-Serial ...

I am new to OpenThread, so there may already exist an answer to this question, but could someone point out the definition of "Context" in OpenThread terminology? Is it the same as "Instance"? Thanks!

I am looking for a stack allowing to connect several hundred devices, Openthread has max numbers of hopes equal 16. Is it possible to extend that number to have 300 devices connected sequentially? ...

I am new to OpenThread and am looking into porting OpenThread to IAR IDE. I wanted to know if there is any documentation, or where I might find more information on the different defines that are used(...

I have a problem with the CoAP multicast requests. When I use the "multicast" address instead of the "unicast", I can ping the server but the CoAP request doesn't reach the server. I used the same ...

I am evaluating openthread for a project and is trying to find any information about whether it uses channel hopping. I've read the thread spec and found something about beacons on different channels ...

I have been playing around with OpenThead for about a month and I have set up two TI CC2538s in an OpenThread network, currently, I can send pings between them and modify the network parameters using ...

I'm trying to use OpenThread in a CC2650 Launchpad, following their example commands at this link. However, the state of the node stays detached forever. And if I try to manually set the state to ...

To preface this I have literally no idea what I am doing and I am just working it out as I go along. I have just installed OpenThread onto a TI CC2538, but cannot for the life of me figure out if it ...

Have oT-cli up and running on 2 different RF platforms (CC2358 and Atmel AT86RTxx controlled via SPI from an Arm7TDMI host). No real compile, link or load issues. Everything seems fine. I can scan ...

I am trying to compile the openthread source code for cc2538 platform.I am following steps given on this link. cd ./bootstrap make -f examples/Makefile-cc2538 But I am not able to compile it. I am ...

I have been prototyping OpenThread on Windows and I noticed that with the current CSMA backoff logic that the Mac class has, it waits an average of ~9ms before every send even if there has been no ...

The demo provided at Github for CC2538 doesn't describe the test procedure. If one follows the procedure described for POSIX (for an older version), then start command is not valid. Though the ...

I would like to work on Weave but I noticed that Nest has open sourced Openthread instead. I would like to get my hands dirty with Openthread but if someone can answer these questions for me I would ...

The OpenThread press release has verbage that says "OpenThread can run on Thread-capable radios and corresponding development kits from silicon providers like NXP Semiconductors and Silicon Labs." ...

I have been asked to take the OpenThread code, compile it, and download it to an SoC (SiLabs - Mighty Gecko). I have added all the files from the src folder and tried to run it through the IAR ...

As a mesh, a signal can propagate across devices. Naturally there must be a hop limit. How many node hops does OpenThread support?

Language

Popular Tags