**483 subscripts questions.**

I have the following issue on the alignment of subscripts in LaTex.
The line of code producing this, being
\documentclass[a4paper, 12pt, twoside]{book}
\usepackage[utf8]{inputenc}
\begin{document}
...

Due to the demand of science report writing from my university, the subscription content should be in mathrm. I have to write every term like, for example, the threshold voltage, V_\mathrm{TH} instead ...

I wan to get basically this expression
The problem, if I don't do much, is the big space on the subscript
The best I have been to do is (from where I erase the top part to make the first picture)
...

The question can be found around but with no satisfactory answer. I want to position the subscript more down and superscript more up.
The code to test it on is simple:
$1.23_{-22.22}^{-1.23221}$
...

The following equation is typed using MS word:
When I tried to type same using LaTeX with subscript _i ended up with this result because there is a cap above subscript "beta". The LaTeX output is ...

Obviously, I can use X^s or X_s to put a symbol s as superscript (X^s) or subscript (X_s) in front of another symbol X.
What about the case with s at the back of X? _s X or ^s X gives something like ...

I would like the "AB" subscripts in my formula to be vertically aligned with each other--ideally, by adjusting the second subscript to match the current placement of the first.
MWE:
\documentclass{...

What's the code for this one?
I've tried this code:
{{a_1}^{{j_1} \left(g \right)}}{{a_2}^{{j_2} \left(g \right)}}{{a_3}^{{j_3} \left(g \right)}} \ldots
But I got this:
Thanks for your help in ...

If $\textit{P}_{\textit{i}}$ is given tile \big($\textit{u,v}$\big),
then Prob\big($H_p__i, _(u,v)$\big) = 1 while,
Prob\big($H_p__j, _(u,v)$\big) = 0, for all j $\neq$ i.
Why I am getting error ! ...

I'm very new to LaTeX but have found it to be enjoyable to work with. Lately I've been focusing on how to get output that will copy/paste well from PDF with special characters. Currently, XeLaTeX with ...

My example
\documentclass[12pt]{amsart}
\usepackage{amsmath}
\begin{document}
\[
\underset{\circ}{(\alpha_i)}^{\sigma}_n
\]
\[
\underset{\circ}{(\alpha_i)^{\sigma}_n}
\]
\end{document}
yields
I ...

I am trying to write the below formula in latex, but as you can see the subscript for sigma is not aligned with the one for mu. This is caused by the square in alpha. How can I align them?
UPDATE: ...

I want to type the below formula.
When I type I get an error saying Double subscript
The code I wrote for this formula
\left \{ e_{ij}^{l} \right \}_{i,j}_{\in \omega _{l}}

I try to write something like:
\[
\bigcup_{\gamma<\omega*2}\mathcal{T}_{\gamma}|_{\aleph _0}
\]
But it can not display $\gamma<\omega*2$ underneath \bigcup in TeXstudio. What is the problem?
...

I am seeing this in the body of the latex format for a journal I want to publish with. But it's prompting an error.
What does this mean CO\textsubscript and which package do I have to include to be ...

How do I write this in Latex. I've looked everywhere and to be honest I don't even know how to describe it in google search bar.
I have
$$(\frac{\partial u}{\partial t})_(t=0)$$
but it's the last ...

I've had a look at the other double subscript error questions here and they don't seen to solve my error. When I simplify what I want the suggested answer works, but then I don't get what I would like ...

I usually write vectors using \boldsymbol. Sometimes, I have to add an arrow using \overleftarrow. For these vectors, there's a large margin between the vector and its index. This is not the case for ...

I came across something interesting in Advanced Engineering Mathematics by Erwin Kreyszig. As you can see in this image, subscripts are in a different font from the rest of the math:
How can I ...

I obtained following correct formula via https://www.codecogs.com/latex/eqneditor.php
The formula is written as follows:
$L_{im}:=(L_{1m},L_{2m},...,L_{(N+1)^{K_{m}}}_{,m})^T$ $(m=1,2,...,M_{max})$...

I am trying to add a symbol that links to the same symbol, regardless of the subscript. Thus \tau_{x} and \tau_{2300} should both link to \tau in the list of symbols.
I have found the \glsarg option, ...

When using the \pmod command as a subscript to a sum, I often encounter some extra unwanted space. For example, writing
\[ \sum_{n \equiv 1 \pmod{k}} ... \]
produces the following image:
Does ...

I'm using function restriction notation like here, but after switching to XeLaTeX with unicode-math I noticed that it looks slightly odd. Here's a minimal working example
\documentclass{minimal}
\...

If often have to deal with subscripts that look "too high". The most known example occurs when writing things like $\chi_\Delta$ but even with regular letters I find myself fixing what I feel like a ...

From this site's questions I have learned that it is possible to persistently lower the placement of subscripts by use of \fontdimen16\textfont2=3.9pt, for example; and it is possible to, in ...

I don't know if this is actually intentionally, but if I use the font:
\usepackage{mathptmx}
and type e.g.:
\beta_{8,t}
it looks kind of weird, because the 8 is so much larger than t.
If I use ...

Is there a way to make the prime symbol of the variable align horizontally with the subscript?
If I do $R\prime_0$ the 0 is too far from the R, I want it to be the same distance as if I do $R_0$. If ...

Whenever I try to do this i get them off to the side. when i am working with simple characters such as just an x and a y as my superscripts and subscripts it works but not when i am using complex ones

I need to typeset the following equation. I am using Lyx, but I can't find anything in its math menu that can handle it. I think I will need to typeset the whole equation using ERT.

I need to increase the space globally between operators in subscripts/superscripts.
Example: \sum_{x=4}
I need a little more space before and after the = symbol in the subscript. It is required ...

The symbol \in doesn't seem to fit quite right in the subscript of the sum
\sum_{i \in I} \Pr(A_i)
For some reason the set-membership symbol seems to be going below the I and it looks weird:
Is ...

I have the following document. As you see after compiling, the subscript b is almost lies on the arrow. It should be upper. What are the way to fix it. An alternative solution is also welcomed.
\...

When using an accented capital letter in a subscript, LaTeX lowers the subscript box:
\documentclass{standalone}
\usepackage[utf8]{inputenc}
\usepackage{amsmath}
\begin{document}
$A_\textup{foo}$ $...

I just started using latex and the closest I've come is
$F\overset{fr}{\textsubscript{s}max}$
or
$F{fr \above 0pt \ \textsubscript{s}max}$

So this is my (simple) problem, I would like to have the superscript (number 2) in a better position compared to the first case which looks really awful to me. A first solution was to add the ...

Textual subscripts like in W_{total} should be typeset in an upright text font (so that code isn't good practice), as has been discussed in various questions here. Now there are several ways to ...

I want to typeset something like
\documentclass{article}
\usepackage{amsmath}
\begin{document}
$$f_{A_{n,k}}(\omega)$$
\end{document}
I don't know how to make the argument (\omega) to be typeset ...

I've created a custom command that takes two arguments and uses one of them as a subscript. Obviously, the subscript has to be in math mode. Unfortunately, it doesn't put the argument in subscript. I ...

Is there a way to achieve that the superscript or subscript for that matter,
appear at half of a variable? either at left or right..
I found this answer, but doesn't seem to apply
How do I adjust ...

Using Python and Matplotlib to create a plot with a legend given by the expression in the title of this question. 'The' is rendered ok, ie, in italics, but, when magnified (zoomed) 'legend' becomes ...

I am using https://www.codecogs.com/latex/eqneditor.php
And added my latex as follows:
\begin{equation}
SSIM(x,y)=\frac{{\left ( 2 \mu_x\mu_y+ C_1 \right )+ \left (2 \sigma _x_y+C_2\right)}}
{\...

I have the following equation:
\begin{equation}
\label{second}
\Sigma _A _\subseteq _\Theta m (A) = 1
\end{equation}
and I'm getting the following errors:
! Double subscript. \Sigma _A _
! Double ...

I would like to write $\sum_i$ to be displayed as \displaystyle $\sum_i$ but at the size of $\sum_i$. How can I do that?
I could maybe use a subscript command, but that is not my question. My ...

Assuming I have defined a glossary entry named v_rob as v_{\text{robot}} and in my text I want to describe the robot velocity at time t using a subscript, I was tempted to write \gls{v_rob}_t. This, ...

Here is an example of superscripts staggering after subscripts with the amsmath package:
{x_\text{P}}^2.
But in this case they do not stagger:
{\bar{x}_\text{P}}^2
How can I get staggering similar to ...

I'm trying to define a command that, given input on the form \mydef{pre}{main}{post}, gives output akin to:
(Where the "foo" and "bar" are just for reference, and the fraction inside is to provide a ...

I wonder how I can align undersets below equations of matrix.
I tried underset and stack under for the scripts, and tried vphantom for aligning. Your help will be much appreciated!
I need the below ...

Let us compile the following code with latex+dvips or latex+dvipdf (there are various reasons for using the DVI format; in my case, it's recompiling and adapting the old code):
\documentclass{article}...

With this code
\documentclass{minimal}
\usepackage{amsmath}
\begin{document}
${\bar{S}}_{\text{rel,t}}$
\end{document}
I get
How can I extend the \bar over the subscript?

For example, if I want to write a closure of a set, which is denoted A_1, should I use $\overline{A_1}$ or $\overline A_1$ (or something completely different)?
For me, the more logical choice seems ...

- math-mode
- superscripts
- spacing
- macros
- fontsize
- amsmath
- equations
- fonts
- vertical-alignment
- math-operators
- symbols
- kerning
- formatting
- positioning
- xetex
- horizontal-alignment
- typography
- unicode-math
- fractions
- beamer
- errors
- packages
- lyx
- accents
- delimiters

- Why does the Party allow playing chess in Orwell's 1984?
- Being alive today: the most improbable coincidence?
- How can I express the time between late 80s and beginning of 90s (somewhere around 1988-1992)?
- "South up" coordinate reference system
- Big symbol "|" in latex
- Post-Golden Age Human Civilization
- Why was Congress able to create an Air Force without a constitutional amendment?
- Why did Dobby help Harry Potter?
- Are crime rates up by 10% in Germany?
- The meaning of "half woman, half girl"
- It's now safe to turn off your computer
- Why the names Type 1, 2 error?
- What term describes pretending outrage to escape a conversation?
- Opposite of "sexy clothes"
- What is my "local ID / citizenship number" as a US citizen?
- Trying to lower my credit card APR; how to know what I should ask for?
- Find the Squarish Root
- Could a person scuba diving take off his air tank and use it to propel himself?
- How can I speed up 5e combat?
- How do I write a shriek?
- Find the true one
- How to maintain friendship with guys after they're married?
- Can someone translate this stamp in a Bible that apparently allowed my roommate's Grandpa to keep it in a POW camp in WW2?
- What is the word for the metal things on boots where the laces go?